Temperature transmitter and regulator with RS485 output
BRAND
Ambient temperature transmitter with two relay outputs. Outdoor, indoor use.
Built-in temperature sensor.
Temperature transmitter is equipped with three two-state inputs for detection of two-state signals – e.g. power presence, water, smoke, airflow, glass break detection, door contact.
Technical data
Measured value
Temperature
Two-state signal
TEMPERATURE SENSOR
Measuring range
-30 to +80 °C
-30 to +80 °C
Accuracy
±0.4 °C
±0.4 °C
Resolution
0.1 °C
0.1 °C
RELAY OUTPUTS
Quantity
2
2
Maximal voltage
50 V
50 V
Maximal current
2 A
2 A
Maximal power
60 VA
60 VA
BINARY INPUTS
Quantity
3
3
Signal for binary inputy
dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse duration on binary input
500 ms
500 ms
Voltage across open contact
< 3,3 V
< 3,3 V
Low voltage level
0 to +0,5 V
0 to +0,5 V
High voltage level
+3,0 to +30 V
+3,0 to +30 V
GENERAL TECHNICAL DATA
Operating temperature
-30 to +80 °C
-30 to +80 °C
Channels
internal temperature and humidity sensor
internal temperature and humidity sensor
Acoustic alarm
from built-in beeper – switchable
from built-in beeper – switchable
Output
RS485
RS485
Range of humidity sensor temperature compensation
all temperature range
all temperature range
Available temperature units
degrees Celsius, degrees Fahrenheit
degrees Celsius, degrees Fahrenheit
Communication protocol
ModBus RTU, ARION, Advantech ADAM
ModBus RTU, ARION, Advantech ADAM
Power
9-30 Vdc
9-30 Vdc
Protection class
IP65 electronics; IP40 sensors
IP65 electronics; IP40 sensors
Dimensions
136 x 159 x 45 mm; length/diameter of external probe 88/18 mm
136 x 159 x 45 mm; length/diameter of external probe 88/18 mm
Weight
approx. 500 g
approx. 500 g
Warranty
3 years
3 years
code
H0430
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.